BOBTHEukBREWER
Well-Known Member
- Joined
- Jun 22, 2008
- Messages
- 546
- Reaction score
- 7
In my opinion, this is the really difficult bit. I have 20 inches of one inch diameter copper tube with hacksaw slots cut into it. The liquor runs clear after a gallon or so (which is returned to the mash), then I get maybe a gallon of liquor, then it slows to a trickle and clogs up, leaving at least 3 gallons of liquor still in the mash. I tried getting the liquor out slower, but it still clogged up.