erikrocks
Well-Known Member
I bought:
*a small craft stool at AC Moore for $15
*four square wood pieces for $0.69 each
*four 3/8" threaded screw-in pieces for the bottom of each handle for about $1 each
*spray paint
*chalkboard paint
I took the 4 legs off the stool, then notched the top of each leg so that the square would fit flush with the rest of the leg.
Did a once over with some sandpaper.
Glued the square onto the notched leg.
Drilled 1/2" holes in the bottom of each of the legs and screwed in the threaded pieces.
Spray painted. Chalkboard painted.
Total bill was around $8 per handle AND I have a can of chalkboard paint to play with now!
*a small craft stool at AC Moore for $15
*four square wood pieces for $0.69 each
*four 3/8" threaded screw-in pieces for the bottom of each handle for about $1 each
*spray paint
*chalkboard paint
I took the 4 legs off the stool, then notched the top of each leg so that the square would fit flush with the rest of the leg.
Did a once over with some sandpaper.
Glued the square onto the notched leg.
Drilled 1/2" holes in the bottom of each of the legs and screwed in the threaded pieces.
Spray painted. Chalkboard painted.
Total bill was around $8 per handle AND I have a can of chalkboard paint to play with now!