bluedragoon85
Well-Known Member
- Joined
- Nov 7, 2007
- Messages
- 210
- Reaction score
- 0
I'm getting ready to keg my first 5 gallon batch, but I don't seem to get this to work. I already attached the regulator, made sure it was on the off position and opened the cylinder valve. I connected everything to the keg and set the PSI on the regulator to about 5-8 psi. I turned the valve on the hose, and nothing. There's no pressure in the keg. This is the system I got. Is there something I'm missing? sorry I just really have no clue and I already followed the instructions that came with the regulator.
EDIT: GOt it to work. I didn't do anything differently, after I shut the cylinder off and opened it again it started working. Also, my regulator is marking that the pressure in the cylinder is all the way to the top, the needle is almost hitting the top. Does this mean my tank is overfilled? or is this normal for a fully filled tank?
EDIT: GOt it to work. I didn't do anything differently, after I shut the cylinder off and opened it again it started working. Also, my regulator is marking that the pressure in the cylinder is all the way to the top, the needle is almost hitting the top. Does this mean my tank is overfilled? or is this normal for a fully filled tank?