Rcole
Well-Known Member
uncle_jimbo said:Got a ton of ideas from this thread and finished mine a couple months ago.
Looks like a great setup.
uncle_jimbo said:Got a ton of ideas from this thread and finished mine a couple months ago.
harten74 said:Thanks gents. I used Google Sketch Up to design it and I'd be happy to share those plans with anyone that is interested.
http://dl.dropbox.com/u/7265982/Restoration%20Brewing/Plans/BrewRig.skp
Updated link on 05/10/12
OneHoppyGuy said:It's a Google Sketch Up file. You have to download it and Google Sketch Up to view it.
Wow...How did I not pick up on that? Thanks. I'll have to download it and check it out.
Here is mine... Gotta add a control panel at some point, but it is pretty much finished
blaster_54738 said:My rig I just finished. About $40 in lumber and hardware. The support arms come off and the tiers fold down, then the bottom comes off for easy storage.
Nice setup...do you have plans or materials list? I like the idea of folding it up to store when not using it. Space is at a premium in the garage!
blaster_54738 said:I can try and scan my plans and post them.
The base is 2x4's and is 4' x 2'6".
The uprights are 2x4's as well and I think I ended up making it 5'6" tall.
The platforms are made with 1x4's and measure 2'x2'.
The side supports are 1x4's I just cut to fit. These have to be removed for it to fold.
I used 1/2"x4" bolts for all of it. Base separates and stores really nice.
Thanks! Maybe another pic from the side? I can't quite make out why it doesn't tip over in the base. Do you have 2 bolts through the uprights into the base? Is that sturdy when the coolers are full? I can see the bracing on the shelves...looks like you have a one by between the braces and the upright. I like the simplicity and common materials used in your setup!
blaster_54738 said:Yeah there is 2 bolts on each side holding it up. It held to coolers fine. I didn't get my holes drilled perfectly so it did tilt a little when I put the first cooler on but nothing major. Here is a side picture after I bolted on the top tier
Here is mine. I am going to add a filter and water directly to the HLT. I presently fill the HLT a gallon at a time. Everything is at a height that I don't have to move anything heavy except the spent grains.
Here's mine. Still need to add a pump, but it works great.
Yeah there is 2 bolts on each side holding it up. It held to coolers fine. I didn't get my holes drilled perfectly so it did tilt a little when I put the first cooler on but nothing major. Here is a side picture after I bolted on the top tier
At the risk of being chicken little-ish, I would advise placing some bracing between the legs and base of this stand. The legs at the two bolts holding the legs upright could easily be overstressed and fail if the stand were ever to be loaded more on one side than the other, and torque the legs and split that connection.
Today's 4th of July project was finally building the 3-tier setup.
Still need to mount the heat exchanger, run some plumbing for water supply, and get the new burners hooked up, but the structure is together. Can't wait to brew with it
wilserbrewer said:At the risk of being chicken little-ish, I would advise placing some bracing between the legs and base of this stand. The legs at the two bolts holding the legs upright could easily be overstressed and fail if the stand were ever to be loaded more on one side than the other, and torque the legs and split that connection.
IMHO you should be. That thing is an accident waiting to happen. You have far too long of a span to simply have a couple of 2x4's held together at a 90 degree angle to hope to hold itself together. All the stress is within a tiny 3.5"x3.5" area where you've put two large bolts which further reduce the integrity of the wood. Over time it will give. Spend the $3-4 on a couple of 2x4 cross braces on either side at 45 degree angles. You already did it at the top. Do it at the bottom for the exact same reasons. Nobody wants to see a brewer get hurt.It had no issues with two 5 gallon coolers on there, solid as a rock. I may do that when I step up to the 10 gallon coolers but right now I'm not too concerned.
Enter your email address to join: