nostalgia
Well-Known Member
The outside coil is 25' of 1/4" refrigeration copper, the inner coil 20' of the same. The input fittings are a garden hose connector threaded to a 1/2" pipe nipple, going into a 1/2" pipe tee. Each end of the run of the tee has a 1/2" to 1/8" pipe reducer with a 1/8" pipe to 1/4" compression elbow.
My soldering isn't nearly as pretty as Bobby_M's, but the design is based on his.
-Joe
My soldering isn't nearly as pretty as Bobby_M's, but the design is based on his.
-Joe