The Pol
Well-Known Member
- Joined
- Feb 12, 2007
- Messages
- 11,390
- Reaction score
- 117
OKAY, I bought a PID from AUBER INST.
I have my control box wired up and ready to go! Everything works, EXCEPT my friggin BK!!! The PID is powered up, ready to go... the thermocouple is doing its job but I cannot get power to my element!
Does it matter what wire takes the power INTO the SSR and which is the OUTPUT? The terminals are lettered "L" and "T". The manual sayes nothing.
Also, my PID is in MANUAL mode, at 100%. Alarm 1 is LIT, MANUAL is LIT, and OUT is LIT. NO POWER TO MY ELEMENT!! So what gives?
I have my control box wired up and ready to go! Everything works, EXCEPT my friggin BK!!! The PID is powered up, ready to go... the thermocouple is doing its job but I cannot get power to my element!
Does it matter what wire takes the power INTO the SSR and which is the OUTPUT? The terminals are lettered "L" and "T". The manual sayes nothing.
Also, my PID is in MANUAL mode, at 100%. Alarm 1 is LIT, MANUAL is LIT, and OUT is LIT. NO POWER TO MY ELEMENT!! So what gives?