Gus,
I took out the pause/reset circuits on the timer. I set up the timer alarm circuit to the common buzzer. I also added the fuse for the PIDs.
On your follow up e-mail (quoted below), you mentioned the missing neutral to the PID. I totally missed that and fixed it with the attached new version. By the way, it has a new name so that both diagrams still exist. I also fixed the original diagram with the missing neutral. If you refresh that drawing you will see the change.
This is the small image and the link below it to see (and save) a full scale diagram that is printable on Tabloid paper (11" x 17")
http://www.pjmuth.org/beerstuff/images/SwiftCreekBrewery-SYL-2352-5500w-2b.jpg
Again, I hope this is what you are trying to achieve.
Paul
I took out the pause/reset circuits on the timer. I set up the timer alarm circuit to the common buzzer. I also added the fuse for the PIDs.
On your follow up e-mail (quoted below), you mentioned the missing neutral to the PID. I totally missed that and fixed it with the attached new version. By the way, it has a new name so that both diagrams still exist. I also fixed the original diagram with the missing neutral. If you refresh that drawing you will see the change.
This is the small image and the link below it to see (and save) a full scale diagram that is printable on Tabloid paper (11" x 17")
http://www.pjmuth.org/beerstuff/images/SwiftCreekBrewery-SYL-2352-5500w-2b.jpg
Again, I hope this is what you are trying to achieve.
Paul