conditioning

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

beermonster1985

Well-Known Member
Joined
Feb 16, 2010
Messages
137
Reaction score
0
Location
chile
is it possible to condition in the bottle so as to free up my fermentor, so the beer finishes fermenting and bottle a couple of days later, then leave for month or so or will it not improve in the bottle???
 
As long as the hydro readings aren't moving and the beer has reached the target FG, you're good to go. You can bottle at anytime as long as you know for sure that the beer is finished fermenting. You just want to make sure that it is 100% done before bottling or you're setting yourself up for bottle bombs. Oh yeah, and don't forget to add the priming sugar before bottling!
 
Most of us leave our beers alone in primary for 3-4 weeks. It lets the yeast clean up after itself, and results in clearer and crisper tasting beers.

You can read about it here; https://www.homebrewtalk.com/f163/secondary-not-john-palmer-jamil-zainasheff-weigh-176837/

My advice to those who want to "free up" their fermenters to brew more, is to buy more fermenters. Buckets are dirt cheap. And you won't be sacrificing beer quality for quantity.
 
so the yeast wont clear up after itself in the bottle??

Once you have racked off of the yeast cake, there is far less yeast remaining to clean up after itself. It might even be ready to drink sooner by leaving it in the primary longer, then bottling. That being said, you may certainly bottle it and end up with good beer after it conditions for a while.
 
Another conditioning question.


If you want to long term age some homebrew.

Let's say standard 5.5% pale ale. at what point do you switch from room temperature conditioning to cellar or fridge (below 55 degrees F)
 
Back
Top