I hosted a graduation party yesterday and learned a valuable lesson. My friends, family, and neighbors are much dumber that I thought. I must have had to explain what beer was on each tap about a gajillion times. As you can see in the photos below I have a four tap system, so I didn't think it would be that difficult for everyone to remember. Especially since only three of the taps had beer in them. I finally just used some masking tape and a marker to label the taps.
So now I would like to add a permanent and more attractive solution to this problem. Because the taps are in a fairly high traffic area I don't want to use larger tap handles. I need something that will sit on the lid that can be changed to reflect the current beers on tap. Moreover, I'd like to be able to utilize a printed label and not require any hand writing. Also, as I am planning on adding some type of mug storage on the lid I don't want the label system to take up too much space. So please look at the photos below and let me know if you have any suggestions, thanks.
So now I would like to add a permanent and more attractive solution to this problem. Because the taps are in a fairly high traffic area I don't want to use larger tap handles. I need something that will sit on the lid that can be changed to reflect the current beers on tap. Moreover, I'd like to be able to utilize a printed label and not require any hand writing. Also, as I am planning on adding some type of mug storage on the lid I don't want the label system to take up too much space. So please look at the photos below and let me know if you have any suggestions, thanks.