turkeyjerky214
Well-Known Member
I got an incredible deal on a bunch of kegs from a guy last summer at $20 a piece (he even threw in one for free because the relief valve wasn't working). I just got ready to use three of them for the first time, and they all have plastic gas dip tubes that need to be replaced. Problem is, they're two different sizes.
The dip tubes for two of them are this style and have an OD of .25", so I'm assuming these would work: http://www.williamsbrewing.com/TAPERED-PLASTIC-GAS-DIP-TUBE-P2570.aspx
Here's the real problem. This one has a slightly smaller diameter. About 1/32 of an inch smaller. It doesn't sound like much, but I can't get the .25" tubes into it.
Does anyone sell smaller dip tubes, or am I going to be stuck having to drill this one to make it bigger?
The dip tubes for two of them are this style and have an OD of .25", so I'm assuming these would work: http://www.williamsbrewing.com/TAPERED-PLASTIC-GAS-DIP-TUBE-P2570.aspx
Here's the real problem. This one has a slightly smaller diameter. About 1/32 of an inch smaller. It doesn't sound like much, but I can't get the .25" tubes into it.
Does anyone sell smaller dip tubes, or am I going to be stuck having to drill this one to make it bigger?