I recently made a batch of extract beer. I have details about the process and ingredients below, but my essential question is this: I have a green apple flavor in the beer and I know this is because it needed to be aged longer. I have already chilled it and carbonated it for about 8 days. Can I get the green apple flavor out at this point? If so how? Warm it up? Release CO2? I'd be happy for any suggestions.
Here are the details of the brew. Super simple brew that I've made several batches of. 3.5 gallon full boil with 3.3lbs of Light LME, 1lb of Pilsen DME, 1oz of Cascade at 60 min, .5 oz @ 15 & .5 oz @ 5. Use an immersion chiller, transfer to carboy. Pitched with Wyeast 1007*** (see note below). Primary for 2 weeks. Transferred to keg for 2 days. Put keg in fridge and set to serving pressure for 8 days. Tried today and blah!
This is the first time I used Wyeast 1007 with this recipe. Normally use 1056 with all the same processes and have never had a bad beer (bottled and kegged).
Here are the details of the brew. Super simple brew that I've made several batches of. 3.5 gallon full boil with 3.3lbs of Light LME, 1lb of Pilsen DME, 1oz of Cascade at 60 min, .5 oz @ 15 & .5 oz @ 5. Use an immersion chiller, transfer to carboy. Pitched with Wyeast 1007*** (see note below). Primary for 2 weeks. Transferred to keg for 2 days. Put keg in fridge and set to serving pressure for 8 days. Tried today and blah!
This is the first time I used Wyeast 1007 with this recipe. Normally use 1056 with all the same processes and have never had a bad beer (bottled and kegged).