aekdbbop
Well-Known Member
Ok, So for a while now, I have been using a two tiered system, right off the shelves of Academy Sports. I have been using a double burner stand (55k btu each, $100) and a single burner stand (160k btu, $25)
What you need:
1. angle grinder with cutting disc
2. big hammer to bend a metal band
3. some heavy gauge wire
4. Double Burner Stand
5. Single Burner (the one in the link is different then mine, make sure yours will work before you cut anything)
I decided it was about time to join the ranks of the single tier brewers out there.. so heres how I did it.. it is really simple, so anyone should be able to replicate without any problems...
What you need:
1. angle grinder with cutting disc
2. big hammer to bend a metal band
3. some heavy gauge wire
4. Double Burner Stand
5. Single Burner (the one in the link is different then mine, make sure yours will work before you cut anything)
I decided it was about time to join the ranks of the single tier brewers out there.. so heres how I did it.. it is really simple, so anyone should be able to replicate without any problems...