What method do you use to clean/sanitize your beer bottles?
BrewForMe said:I always rinse right after I empty them, then before bottling day, a ride through the sanitize cycle in the dishwasher and a skinny dip in starsan (the bottles, not me) and ready for some fresh brew
To clean (after emptying): OxiClean Free and hot water in a 5-gallon bucket. Soak for 1-2 nights to remove residue and labels.
To sanitize (before filling): StarSan in a Vinator. 4 pumps in each bottle and then hang them on a sanitized bottle tree.
What method do you use to clean/sanitize your beer bottles?
RINSE IMEADIATLY after drinking, then on bottling day I put them in the dish washer with no soap to sanitize.
beer_man_now said:i put mine in the oven at 300 deg for like 3 hours. my buddy told me to do it that way. i'm not sure it works, but i've never had a problem.
+1.
When I started brewing, I did not have enough dark bottle so I ended up using Corona bottles. In those clear bottles, you can see even the smallest amount of residue. This is how I realized that rinsing just after drinking is definitely not enough: the bottom of the bottle would be fine, but some residue would always remain in the bottle neck. This is why even if I quickly rinse right after drinking, I still soak overnight in oxyclean before bottling.
What method do you use to clean/sanitize your beer bottles?
i put mine in the oven at 300 deg for like 3 hours. my buddy told me to do it that way. i'm not sure it works, but i've never had a problem.
To delable or clean out mold and gunk from bottles.
To rinse-
To sanitize using either starsan or iodophor.
To sanitize (before filling): StarSan in a Vinator. 4 pumps in each bottle and then hang them on a sanitized bottle tree.
For those of you that do the Oxy or PBW & water soak over night, do you ever end up with a white residue on your bottle, case I think it os called?
Enter your email address to join: