kxx
Well-Known Member
Help this Electric Brewery find a new home!!
I will be moving into a new place in a few months, smaller than my current location. I have an electric HERMS system I've been using for the last 2 years, that I will not have the space or power to run at my new location... So, I will likely be building or buying something smaller. Anyway, I'll be selling this system, so let me know if interested and I can send some pics.
The loot:
1 - Therminator
1- set of Therminator Quick disconnect s
1 - March Pump w/Polysulphone Head
1 - 8" Adjustable Thermowell(from stirplates.com)
2 - Wired Rancos - single direction
1 - Dial Thermomitor
1 - Minibrew Mash Tun 15g
1 - Minibrew Hot Liqour Tun 15g W/ heat Exchange coil(copper) & w/ 1" heating element thread
1 - Boil kettle(keggle converted) 15g w/ 1 " heating element thread
1 - Electric Brewery Control(from Highgravitybrew.com) 30A/220V
1 - 3500W heating element (for HLT) 30A/220V
1 - 4500W heating element (for Boil Kettle) 30A/220V
1 - Float switch(from Morebeer)
3 - 1/2" ball valves
1 - Std Hop Stopper, Special Nipple 1/2 for kettle attachment(from homebrewsolutions)
6 - Polysulfone Quick Disconnect Coupling - 1/2" Male Pipe Thread Body
3 - Polysulfone Quick Disconnect - 1/2" Inline Hose Barb Insert
1 - Polysulfone High-Flow Quick Disconnect Coupling - 1/2" Elbow Hose Barb Insert
I originally ordered the simple electric brewery system from :http://www.highgravitybrew.com/prod...-Electric-Brewery-Mashing-System-276p2351.htm
Batch by batch, to improve my process I added pieces here and there; therminator, floatswitch, hopstopper, etc.
A bit on the process... I usually get ~83% efficiency. It works wonderfully - with a little practice you can keep your mash temp within 1-2 degrees of your desired target.
This is a well used system(I've brewed about 40 batches with it), but it still works very well. I'd like to sell it all-in-one and will consider serious offers.
Adding the pieces, the system amounts to about 2000.00(New). I'm willing to cut this price in half, and will consider reasonable offers.
PM me if you're interested and have questions... and I can send pics. I'm in the Lowell, Ma area.
I will be moving into a new place in a few months, smaller than my current location. I have an electric HERMS system I've been using for the last 2 years, that I will not have the space or power to run at my new location... So, I will likely be building or buying something smaller. Anyway, I'll be selling this system, so let me know if interested and I can send some pics.
The loot:
1 - Therminator
1- set of Therminator Quick disconnect s
1 - March Pump w/Polysulphone Head
1 - 8" Adjustable Thermowell(from stirplates.com)
2 - Wired Rancos - single direction
1 - Dial Thermomitor
1 - Minibrew Mash Tun 15g
1 - Minibrew Hot Liqour Tun 15g W/ heat Exchange coil(copper) & w/ 1" heating element thread
1 - Boil kettle(keggle converted) 15g w/ 1 " heating element thread
1 - Electric Brewery Control(from Highgravitybrew.com) 30A/220V
1 - 3500W heating element (for HLT) 30A/220V
1 - 4500W heating element (for Boil Kettle) 30A/220V
1 - Float switch(from Morebeer)
3 - 1/2" ball valves
1 - Std Hop Stopper, Special Nipple 1/2 for kettle attachment(from homebrewsolutions)
6 - Polysulfone Quick Disconnect Coupling - 1/2" Male Pipe Thread Body
3 - Polysulfone Quick Disconnect - 1/2" Inline Hose Barb Insert
1 - Polysulfone High-Flow Quick Disconnect Coupling - 1/2" Elbow Hose Barb Insert
I originally ordered the simple electric brewery system from :http://www.highgravitybrew.com/prod...-Electric-Brewery-Mashing-System-276p2351.htm
Batch by batch, to improve my process I added pieces here and there; therminator, floatswitch, hopstopper, etc.
A bit on the process... I usually get ~83% efficiency. It works wonderfully - with a little practice you can keep your mash temp within 1-2 degrees of your desired target.
This is a well used system(I've brewed about 40 batches with it), but it still works very well. I'd like to sell it all-in-one and will consider serious offers.
Adding the pieces, the system amounts to about 2000.00(New). I'm willing to cut this price in half, and will consider reasonable offers.
PM me if you're interested and have questions... and I can send pics. I'm in the Lowell, Ma area.