I got the deluxe two keg starter kegging kit from kegconnection.com fairly recently. On one of the regulators, I've noticed that no matter where I set the set screw (even fully backed out with no keg connected), it will slowly pressurize to 20 lbs, but obviously higher if I turn the set screw past the 20 lbs point. My guess is that the diaphragm (or whatever it is in there that controls pressure) is getting stuck at 20 lbs when coming off the pressure or there is a hole in the diaphragm (if indeed it is a diaphragm in there). Is there any way to find out what is causing the problem and if so, could one rebuild the regulator if need be or should I just get a new one? Thanks.
-AJ
-AJ