TheCapn22
Well-Known Member
I've been trying to get my dual regulator dialed in. The one on the left works great, I can set it to where I want easily with no problems. The one on the right is giving me all sorts of problems. I turn off the gas, use the valve to release the gas in the gauge. I have the screw completely loose. I turn on the gas, go to turning the screw clockwise, as soon as there's tension it goes straight up to 15 psi, I can't get it any lower. Is it broken?
The second issue is the cardboard in both my gauges are folded, so I can't even see if it's going up past 15 psi. Which isn't really a big issue for me, I want to use the set and forget method, so I'll never really need to go above 12 or so psi (I think!). I thought about taking it apart and trying to fix the issue myself, but if the regulator's broken, then I'll need to return it anyway.
The second issue is the cardboard in both my gauges are folded, so I can't even see if it's going up past 15 psi. Which isn't really a big issue for me, I want to use the set and forget method, so I'll never really need to go above 12 or so psi (I think!). I thought about taking it apart and trying to fix the issue myself, but if the regulator's broken, then I'll need to return it anyway.