Search results

Thanks for all of the info. So clearly I need to either except the water waste and length of time or seriously look into going more industrial with my cooling system. I was always under the impression that brine systems were just as nasty as glycol? Guess it's time to start researching small...

One more question, you said one pass, so I assume you have the coolant full bore and the kettle flow restricted?

Yes to the chiller hooked up the right way. Perhaps that's the problem, the pump. I've been using a pond pump, type you would use for an outdoor fountain. I currently do run the wort back into the boil kettle, recirculating till it hits the proper temp. I will dry a run with just water, remove...

Ice in the cooler already. Added a second bucket with coiled up tubing in it with ice to try and act as a secondary chiller for the return water. Other thoughts?

I was hoping for some insight as to what im doing wrong. Have a brutus inspired keggle set up. Blickmann Therminator mounted under the boil kettel burner probably 16 inches of clearance, maybe a little more. Being in a water sensitive area I use a pump recycle cooling water through a ice chest/...

Bought a bunch from McMaster, and even those tend to break down pretty quick. My other complaint, is even with some lube on the fittings they don't always "quick" disconnect. Any complaints about the cam locks?

I currently use the poly quick disconnects, but go through a ton of the o rings so I am thinking of switching to ss. Anyone have an opinion on the cam lock vs ball lock (think thats what they call them) style? Temp issues as far as handling? Any opinions or experience would be appreciated.

All items sold. Thanks.

As I have upgrade my system I have some different items I have outgrown. These would be great for someone starting out or in an apartment. 30qt polarware kettle, $50 5 gallon cooler with mash tun conversion kit. Add another cooler and you can fly sparge, kit will work for a bigger cooler if...

I like to step mash, so I was already thinking I would go the rimms route. Cidah, you mention that you upped it to two 5500 for doing 10+ gallon batches, and maybe others can chime in. From looking at kal's sight, I was under the impression that 10 gallon batch's (which for me is really 11...

Opinions on herm vs rim? For those times I want a step mash, my current set up is rim and I don't have any scorching problems with a direct fire, any problems with the heating element contacting the grain if I stick one in the mash tun? Ok, I admit in being a bit lazy asking this question and...

After looking around a bunch on the threads, the one question I didn't see asked does anyone regret, or has anyone switched back to direct fire after going electric? I am currently running a single tier 3 keggle set up, and was thinking of adding a control panel. After a little more looking, and...

I boiled just like any other wort, because at first I was going to ferment with a normal yeast then add the lacto, but started reading all the suggestions to lacto first to get a better sour. It just threw me to see a full krausen, since I didn't expect that from the lacto. It's been a couple...

So I was going to make a Berliner weisse, which turned into I'm going to make a super funky sour wheat. My plan was, and what I have done so far, chill wort to 75-80, and lactobisllious, hold at 80 for two days then add Brett. Let the Brett work for a few weeks then add the wlp Belgian sour mix...

Either a porter or a dry stout, have a yeast cake of wlp 007 that I'm gonna pull my bitter off of, haven't decided what which I'll do yet.

Ok, let's assume there are no stupid questions just stupid answers. With that perhaps this is a stupid question. My wife (she is awesome) just got me a blickmann conical as an early birthday present. Since I can pressurize if to transfer the beer, has anyone hooked it up to the dispensing side...

I usually take a gravity reading with about 20 minutes left just to make sure I'm close to my target, figure that gives me enough time for everything to be sanitized if I need to make any adjustments. Only once have I been far enough off so far, and yes, adding some dme is a great fix.

Reply please and thank you.

Since I live near Russian RIver Brewing I have done several trades with people for Pliny the elder. Nun of them have lived in the Florida area so here's what I'm hoping, someone with access to cigar city beers will read this and be willing to trade for ???? Being on the west coast I imagine...

So the place in Washington, a house or po box? Basically I've had luck with ups, which will only deliver to a physical address, but not a po box. Pliny only comes in 500ml bottles, so a small bomber. Not sure I want to brave mail customs, so if it's someplace ups can take the box then im interested.