Search results

Well, I got back on the brewing bus but I noticed the relief valve on one of my corny kegs isn't sealing right. I gunked it with some keg lube and that quieted her up, but I was looking into getting replacements. Two questions: -Best place to get them? -What kind do I get? Micromatic has a...

Various keg relief valves...

Various keg relief valves...

Various keg relief valves...

I only briefly skimmed everyone else's replies, so if I'm repeating sorry (too early to read much). I had similar issues with my stir plate when I first tried it. My fan was positioned too low in the enclosure. Moving it up fixed everything.

Foam is your friend. I just did my first batch using Starsan yesterday and I can tell you that my IPA is bubbling away happily.

I don't carry it just by the handle when it's full. Other hand underneath to keep all the stress off the neck.

I still use glass and haven't had any problems. But I also don't drink much while I'm brewing, have handles for all my carboys (before that, milk crate), make sure not to fill them with hot liquid, etc. I think they're relatively safe if the proper precautions are taken. Now, having said...

I just bought a gallon from here $34.95 + shipping. $20 was a steal!

My Accidental IPA. One of my staple brews.

"Accidental" IPA 14-B American IPA Size: 4.96 gal Efficiency: 80.0% Attenuation: 84.3% Calories: 209.22 per 12.0 fl oz Original Gravity: 1.064 (1.056 - 1.075) Terminal Gravity: 1.010 (1.010 - 1.018) Color: 11.4 (6.0 - 15.0) Alcohol: 7.05% (5.5% - 7.5%) Bitterness: 51.37 (40.0 - 60.0)...

Stay safe. Thank you for serving. I work with a lot of you guys (civilian working for the Army) and I'm constantly amazed by what you all do.

I'm in Morristown. Welcome!

Well, looks like I was right about the washer: http://stores.kegconnection.com/Detail.bok?no=131 I don't think teflon is necessary though, since the pressure on the washer would seal the line internally to the threading.

Ok, so originally the shanks of my keezer had barbed ends. But through my various acquisitions I now have these beer line connectors that screw directly onto the shank. I proceeded to dremel off the barbs that were there, sand it all down to about 2000 grit for a good seal, and then connect my...

I think you can only assume this if you have check valves on your air lines between the keg and your manifold/regulator.

I only skimmed the responses so far, so if I'm repeating please forgive me. To troubleshoot my system I tried to isolate as many different areas as possible. I have a 4-way manifold split coming off my regulator, with valves on each line. So first I pressurize the whole thing, with no kegs...

I was just about to post a link to my pic, and realized it was already here. Glad it could be of help!