Search results

Hi All, I recently brewed an all grain batch using the parti-gyle method with one batch to become a lager (pressure lagered) and the other an IPA. The grain bill was as follows: 18 lbs Pilsner Malt (Avangard) 7 lbs Pale Malt (2 Row) UK 2 lbs Cara-Pils/Dextrine I mashed at 150F. I have a...

For plastic to metal fittings like this: Should a plastic piece like so be inserted between: I've read that they should or shouldn't be needed depending upon who you ask. I realize with the ball lock taps they have a small rubber piece at the tip like so: If going from a brass flare male...

I've been chasing a leak on a secondary 4 product brand new taprite regulator and need a sanity check. I tested from my co2 tank to the secondary manifold by opening the tank, cranking up the primary to 60psi, leaving all the secondary regulators untouched at 0 psi, and then closing the tank...

Hi All, I've been looking into upgrading my two keggles with 1/2" silver soldered bulkheads like the one's from BrewHardware.com. The problem I noticed was that when I measured the currently drilled hole sizes they were closer to 15/16" or 1" than the recommended 7/8". I am assuming this will...