Search results

Selling some more stuff I never used in my brewery. 1 Bruheat heater, 30 Bucks 1 60 RPM Stir Motor, 5 Bucks 1 14 conductor plug, 5 bucks 2 30 amp 24v relays, 10 bucks 1 24V 1/2" solenoid valve, 10 bucks 1 bracket to hold 40 plate heat exchanger, 15 bucks Buyer to pay shipping

2 - SYL-2352 Temp controllers 2 - 1 1/2" RTD x 1/4" NPT 1 - 4" RTD x 1/4" NPT 2 - 6' cables with quick connectors 2 - Panel connectors They are about 4 years old and work OK. One of the PID's has a light out in one of the numbers. Just did some upgrading on my panel...

Here's a beer keg urinal I put together for a friend of mine. We mounted it to the back wall of his garage. I tried to use all the original keg parts so we cut and crimped the spear and cut a slot across the back. It empties into his storm drain. Now I just have to come up with some privacy...

I was playing around with a video camera on my last brew day and thought I would share. It was around 5 hours edited down to 6 1/2 minutes. Mike http://youtu.be/cAR0tVq1KQY

I just finished up my hops for the year and ended up with 3 pounds of cascade. Here's a video of the foodsaver in action. It's pretty impressive how much you can stuff in those suckers. Mike

13 Gallon stainless keg with stainless false bottom. 150 bucks. http://westernmass.craigslist.org/for/2442694924.html

I have two of these quick release brackets left. They are made to fit the Keg Cowboy 40 plate heat exchangers. They will lock the HX securely to your sculpture and still be easily removed for cleaning. They are mild steel, bead blasted, primed and painted. The clamping pad is stainless steel. 45...

I just finished integrating this 40 plate heat exchanger into my system. haven't run any wort yet but I did a couple test runs with water. Using 45 degree tap water , It cooled it right down to 68 at around 1 gallon per minute. I will probably end up using my immersion chiller as a pre-chiller...

I made a quick video this morning while I was kegging beer. I like this setup being that it's totally enclosed, clean and simple. Cheer Mike

I started using sankey kegs for fermenters so I made up this washer to clean them and found it works well on carboys also. The tip is just a 1/2" to 3/8" stainless coupling. I tried a couple different tips but that one seemed to work the best. It's a good multitasker too, I use it to pump ice...

I finally got around to adding a second pump in my system for whirlpool chilling and wort transfer. I used a stainless siphon tube upside down for the discharge. When its done cooling I just drop it into a fermenter to transfer. The pump is a little giant 4-hc-md. I'm thinking of adding an O2...

I'm selling a 10 gallon Blichmann boilermaker brew pot with the optional boil screen. It comes with the allen wrenches, cleaning brush, heat shield, and instruction book. It is in perfect condition and never seen a flame. $275.00 plus shipping or pick it up in western MA.

Here's a few pics of my first label. I had it printed at staples for 44 cents a sheet, 3 to a sheet. My tried using my inkjet printer but they bleed like crazy when they get wet. The ones from staple look much nicer with a bit of a shine to then.

I started building a fermenter from a keg using Harpo's design. Thanks Harpo :) So to get a sanitary weld without purging the whole keg I put this little back gas cup together. Its made from a 1 1/4" copper pipe cap, a piece of 1/4" tubing, and a piece of perforated plate I cut out of an old...

I saw these new stainless milk cans at milehidistilling.com with gasketed clamp down lids and triclamp fitting built in. Looks like they would make a great fermenters. Anyone out there have one already?

So my wife's car passed 50K and need's a set of tires. Were driving through town an decide to stop into Town Fair Tire. The car is a Mini Cooper with run flat tires and I was well aware they were going to be expensive. I tell the sales guy I would like a price for 4 tire's, the same that's on...

After four brews on the new system I guess I can call it done. Well done would be harsh because are they ever really done. My thanks to all who helped, posted, and inspired. This forum is by far the number one source for brewing knowledge. Here's a description of my brewing process. My...

I put in an exhaust fan for my eherms rig this weekend after dealing with the steam from by first brew using a bunch of window fans. Its an inline fan from Vortex purchased on Ebay. Its a six inch model rated for 449 CFM. For the ductwork I used 6" PVC drainage pipe. It works well becaust all...

I've been looking for a way to build a 240 volt heatstick for the boil kettle in my eherms rig. I wanted it to have a replaceable element so this is what I came up with. It's made mostly from parts from StPats and a couple from Mcmaster. StPats 2 - 2" weld on ferrules, $8 ea. 2 - 2" silicone...

I was able to get my hops tower finished up this weekend. The top was welded up from a bunch of scrap metal and the pole is a 20' 4x4. It's in the ground 4' with 3 bags of cement. Mike