Search results

Thank You Everyone!!!! I finally got it dialed back in again. Still waiting to see of the air pocket issue resolves itself but at least I can pour actual beer again and not get all foam. When I measured the keg temp with a laser surface thermometer, it was 50 deg. Last night I lowered the...

Temp is 38 deg. I replaced the beer line with 10' of new 3/16 ID line. I'm still getting the air pocket in the line on the first pour and on other pours that are about 20 mins or so later. After about 12-16oz of beer being poured, the foam for the most part goes away and I can pour normally...

Still having issues with a ton of foam. I just replaced the keg with a new keg of Miller Lite. I cleaned the lines and faucet. Still nothing but foam. I ordered a new keg coupler and installed it today, still foam. Does beer line go bad? I'm willing to try anything at this point. I'm not...

Pressure is 10psi.

Took the coupler off and checked the gaskets on the coupler and the keg and they all looked fine. I applied some keg lube and reinstalled. Still all foam. I might clean the lines tomorrow just to see if that makes a difference.

I have not taken the coupler off yet, but the small gasket on the coupler was changed about 3 kegs ago.

I have had my current keg in my kegerator for about two weeks. FYI- I changed the faucet to a Nukatap a couple of months ago and all was good. Other than the first second or two of the first pour of the day being foamy, everything was fine. I figured that was just the hotter beer in the...

I recently bought a kegerator off Ebay. It is a new unit and came with everything needed to get started. To start I got the 2.5Lb CO2 tank filled and got a 1/4 barrel of Bud Light. I put the keg in the cooler and turned on the CO2 to 12psi. After a day in the kegerator, the beer is all foam...