Search results

Lets do it!

10 Guage is only rated for 30 amps. You will need 6 guage. Look for 6/3 which will include 2 hots, a neutral, and an uninsulated ground wire (which is not counted as it does not carry current) Here is your link to a 50' roll. However they will cut to length in the store...

In

You can swap out that breaker with a quad breaker. In essence it has 2 pole joined together in the center and another two pole joined together via bracket for the outside handles. Similar to this picture. You would still be limited to 20 amp due to wire size which is larger enough for the 3500W...

What is the screw down terminal rated for??

That looks like a single regulator with Dual gauges and dual outputs. The gauge on the left reads bottle capacity while the one on top reads your selected pressure to both outputs. Are you confusing the two gauges?

$12 for an exchange at my LHBS.

Looked into a swamp cooler? Its basically a tub filled with water and swap out frozen water bottles throughout the fermentation period.

+1 I did the same thing.

Make sure the neutral bar isnt bonded to the enclosure.

Sign me up!

I take a plastic garbage can that is big enough for the Corny and the CO2 tank. Fill with ice and bungy cord a thick insulating pad around it all. Corny has stayed cold for up to 7 days.

I usually take a corny of my house Pale. But sometimes I'll take a blonde if the weather is going to be hot.

I circulate boiling water from my HLT through the chiller and back to HLT for 20 mins or so. I then hook up to the BK drain remaining water to a bucket until I get wort. Then let it flow to fermenter.

Thats why I moved to Oregon. Much more civilized people here. :mug:

I use paint strainer bags for the hops in all my beers. They work great! I use binder clips to clip them to the side of my BK. I have found that I can only get about 4 oz in a 5 gallon bag. Sometimes I end up using two. I re-use them as long as I can. During clean up, after I have dumped the...

You're in Utah Brewtah? Where are you going to buy a commercial keg? According to this http://publicsafety.utah.gov/investigations/AE_FAQ.html#kegs that is not legal.

Woke up to 12 outside Portland, OR this morning.

Welcome, from Forest Grove here. :mug:

I read it as an either/or process. Unplug the dryer and then use the plug for brewing, leaving the dryer circuit intact. However, if he means to use the dryer and brew with the same circuit, thats a definate no!