Search results

Interesting. Next question... How do I know if I need oxygen action?

I actually logged in just to see if anyone else has this problem. I get crazy foam with cip application. 3 minutes in, and the foam runneth wild. And idea what's going on?

Format the micro SD card and reinstall as needed.

Will that display it even if it's on USB0 or USB1? (that's where my grey market one lives)

Also, I forgot to ask, is it a grey market arduino? Did you check the port the arduino is on?

I had the same issue, but iirc I was prompted to download an update through the program screen

Thanks!

Hey all, There was a post here on hbt where someone make a joke about making an offering to the drain troll whenever they dumped a bad batch. Does anyone have a link to that thread? I've tried searching on a couple occasions, but drain and troll seem only to pull up posts about forum...

Cut back on the booze?

I only glazed over your problem (drunk, sorry), did you run the permission fix code? sudo /home/brewpi/utils/fixPermissions.sh

3.18 gallons. Final volume 2.5 ish

2.5 Gallon Batch G/FG/IBU 1.0672 / 1.0175 / 53 American Two-Row Pale 5 lbs American Vienna 1 lbs American Crystal 40L 4 oz Belgian Carapils 4 oz Warrior 0.5 oz 60 min Citra 0.5 oz 5 min Columbus 0.25 oz 5 min Fermented at...

Yeah, Yooper clued me in on the refractometer thing. Those are the readings with the corrections from Brewers Friend and Sean Terrill. Wyeast 1272, OG 1.100 (Refractometer) FG 1.030 (Refractometer) Corrected to 14% ABV, Temperature 66 degrees with no more than a .1 degree swing There is no...

So, I've been fermenting my first batch of beer under strict temp control thanks to everyone over on the HowTo BrewPi forum, and I have an issue. The krausen isn't going away. I'm used to it dropping in a couple of days, but it's been 8 days so far.... 2015-09-10_09-58-55 by Mark E, on...

*Bought*

*Bought*

I did not... I posted on the brewpi forum, and Elco jumped in and gave me a hand. There wasn't a specific error that was pin pointed. Edit: Here is my *ahem* suave setup that I hacked from my STC-1000 box 2015-09-07_08-55-00 by Mark E, on Flickr

I can't understand how the brewpi worked so well the first time, and now, I'm on try number 5. Again, I shut down the brewpi, move it 30 feet, plug in the arduino and pi....boom. Failure to boot. I re-flashed the working image and it appeared to bring me back to where I left off, but the web...

Where were you 4 hours ago? Not that I'm aware of, but each time I had to pull the plug, I couldn't boot the pi. Now I'm having more problems. I can't access the webserver page from a remote computer (on the same network) and I can no longer putty into the PI command line. These were...

I'm about to have an anger meltdown. It took 3 hours to reinstall and update everything. I made sure I could log in with putty before I shut it down. I move the pi to the hallway with the fridge and boot it up. Nothing. Not connected to the internet like it was two seconds prior. No way to...