Search results

Bump and price drop to $30/each.

I bought one of these 1/2" conduit punches for making my ebiab system, then later on found out I already had one. So, now I'm selling two. They're 1/2" conduit punches so they make a 7/8" hole. $35/each, shipped.

Thanks for all the input guys, I really appreciate it. I've gone ahead and purchased 30' of 8/4 cable, as I was able to find a source that's relatively cheap. I might get away from 10/4, but I like the peace of mind of 8/4. You never know if something gets knocked loose and causes a short. For...

This all looks amazing! Definitely keeping this in mind for when I'm finished with my eBIAB system (should be easy enough to modify). Do you still have plans to make bolt together kits?

Only the run from the breaker to the outlet (which is already 8ga) is permanent and inside the wall. The rest will be portable cable that I unplug and store whenever the system isn't in use. The element will probably be used similarly to yours. Mostly to heat water to strike temp and after...

That's a really good point. I think I'll pick up about 30 ft. of 8/4 SOOW cable, just to be on the safe side. Basically it would be breaker/panel -> 8ga cable -> outlet -> 8ga cable -> control panel Thanks for the feedback everyone! Now to find cheap 8/4 cable :D

Yeah, it is. My electrical panel is actually in my garage and the range outlet installed is directly below the panel. That whole piece as well as the GFCI breaker was wired up/installed by a local certified electrician to be completely up to code.

Sorry for all the questions, I'm a bit of an electrical newbie and I've gotten some conflicting information from friends/colleagues. So, even if my system will only use ~24A, I would still need to use 8ga cable instead of 10ga just because the breaker is 40a?

Thanks, I'll check those out! To original plan was to put a 30A breaker in, since my system won't actually need more than ~24A or so. The electrician couldn't find a 30A breaker for my panel locally though, so he offered to install a 40A for the same price, since he had that on hand. I have...

I've been gone for quite a while now, but finally getting back into building my 15gal, 5500w eBIAB system, but I'm trying to find a good source for a main power cable. I have a dedicated 40A GFCI breaker going to a 4 prong range outlet installed in my garage, but I'll be brewing in my...

Back from the dead! After switching jobs, moving a few times, traveling, and the general chaos of life, I'm getting back into brewing and finishing this build which was sidelined and stored way too long ago. So back to building! I have all parts bought and have started putting it all...

In!

In!

Don't know if anybody is interested, but I got a bottle each of Stone Vertical Epic 11.11.11 and 12.12.12. Beer info here: http://www.stonebrewing.com/verticalepic/#11 Looking for stuff I can't get in NC, big fan of IIPAs, Stouts, Saisons, Belgians, Sours, and weird beers.

Winner is thatjonguy! PM sent, if it doesn't work out, I'll go in this order: 1 @thatjonguy with the Boulevard Saison Brett 2 @medicmang with the White Rajah 3 @bearfoot with the Volunt Plus Erat

Recipe: Shōga Sorachi ēsu Saison (Ginger Sorachi Ace Saison): O.G: 1.048 F.G: 1.005 (could go lower since 3711 is a beast) ABV: ~5.7% IBU: 33 SRM: 9.16 3# Pilsen LME 2# Pilsen LME (late addition) 1# Munich LME (late addition) 1# Wheat LME (late addition) 0.5# Belgian...

Anyone?

I do not have anything nice to say, so I will just update and send PMs on Friday afternoon. I guess civility on the Internet is completely dead.

@thatjonguy and anyone else interested, here's the front and back. The printed best before date isn't very clear, but it says "0.0.2015".

You are, of course, entitled to your opinion, it's not up to me to judge or call anyone names. I'm merely trying to mix it up a bit. @thatjonguy, it's from the US release. I picked up a 6 pack, gave half to my dad, drank one, shared one and this is the last one left. Here's how I see it...