daggers_nz
Well-Known Member
hi there I wanted to take this partial grain recipe and get rid of the LME:
Pale (4.5 lb)
Crystal 10L (0.5 lb)
Carapils (0.5 lb)
Wheat (0.5 lb)
Light LME (3.3lb)
so I've calculated how much percentage each grain makes up in the total grain bill (excluding the LME) and then multiplied it by the mass of the LME to get the additional amount of each grain to add to the original bill.
ie. Pale = (4.5lb / 6lb) = 0.75
4.5lb + (0.75 * 3.3lb) = 6.975lb
and the end result is:
Pale (6.975 lb)
Crystal 10L (0.775 lb)
Carapils (0.775 lb)
Wheat (0.775 lb)
is this correct or have I done it wrong, missed anything etc. Left out the hops as that will stay the same anyway
thanks
Pale (4.5 lb)
Crystal 10L (0.5 lb)
Carapils (0.5 lb)
Wheat (0.5 lb)
Light LME (3.3lb)
so I've calculated how much percentage each grain makes up in the total grain bill (excluding the LME) and then multiplied it by the mass of the LME to get the additional amount of each grain to add to the original bill.
ie. Pale = (4.5lb / 6lb) = 0.75
4.5lb + (0.75 * 3.3lb) = 6.975lb
and the end result is:
Pale (6.975 lb)
Crystal 10L (0.775 lb)
Carapils (0.775 lb)
Wheat (0.775 lb)
is this correct or have I done it wrong, missed anything etc. Left out the hops as that will stay the same anyway
thanks