First off a little background. I have brewed several 5 gallon extract kits, and recently have done 3 Brooklyn Brew Shop 1 gallon all grain kits. I love all grain and am ready to switch. Having brewed 5 and 1 gallon batches, I know that 2.5 gallon is the perfect size for me. I'm the only beer drinker in the house, and like to brew often.
Thank you for the great wealth of knowledge, I have spent ALOT of time on these forums researching what it is I want in my setup. I'm looking to build a eBIAB kettle with recirculating pump, running on 110v 1650 watt element. I already have the 6 gallon ss kettle with strainer basket, and a greatbreweh 12v pump is on the way. I'm going to add a weldless bulkhead with valve to attach the pump to. The pump will be used to recirculate during the mash, and to pump through a plate chiller after the boil.
Now on to the part I need help! I want to have a small control panel with PID for controlling mash temp, and have a switch for the pump and heat and probably main power. I plan on getting all the parts from Auber, including their small project box, illuminated press button switches, and PID with rtd sensor. I have not seen many 110v control panel builds, and none like what I have envisioned. If someone can point me in the right direction for a wiring diagram that would be great. I have a pretty good understanding of how this stuff works, but when it comes to wiring I really need a diagram. Any help/pointers/suggestions is really appreciated!
Thank you for the great wealth of knowledge, I have spent ALOT of time on these forums researching what it is I want in my setup. I'm looking to build a eBIAB kettle with recirculating pump, running on 110v 1650 watt element. I already have the 6 gallon ss kettle with strainer basket, and a greatbreweh 12v pump is on the way. I'm going to add a weldless bulkhead with valve to attach the pump to. The pump will be used to recirculate during the mash, and to pump through a plate chiller after the boil.
Now on to the part I need help! I want to have a small control panel with PID for controlling mash temp, and have a switch for the pump and heat and probably main power. I plan on getting all the parts from Auber, including their small project box, illuminated press button switches, and PID with rtd sensor. I have not seen many 110v control panel builds, and none like what I have envisioned. If someone can point me in the right direction for a wiring diagram that would be great. I have a pretty good understanding of how this stuff works, but when it comes to wiring I really need a diagram. Any help/pointers/suggestions is really appreciated!