CO2 Bulkhead
- Thread starter jjefrey
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
zachattack
Well-Known Member
- Joined
- Mar 6, 2012
- Messages
- 2,808
- Reaction score
- 323
Do you need the gas post on there? You can get a generic (non-keg) bulkhead from McMaster, but of course it won't have the post.
You can get a SS one with flare fittings for $25 (are 37 degree flares what MFLs use?)
Or a brass one with 1/4" barbs for $7
On the brass one it looks like you can go through a 0.375" wall, not sure how thick you need.
You can get a SS one with flare fittings for $25 (are 37 degree flares what MFLs use?)
Or a brass one with 1/4" barbs for $7
On the brass one it looks like you can go through a 0.375" wall, not sure how thick you need.
jjefrey
Well-Known Member
I saw that one and similar at multiple suppliers, but am really looking for one with the quick disconnect.
zachattack
Well-Known Member
- Joined
- Mar 6, 2012
- Messages
- 2,808
- Reaction score
- 323
Gotcha. Sorry I couldn't help!
JuanMoore
Getting the banned back together
Looks to me like a standard flare bulkhead with a plug adapter and plug on one side, and a barbed fitting on the other. While I don't see anyone else selling those parts together as a single assembly, there's no reason you couldn't piece together the same thing.
