SSR and PID combo, with they work together

bf514921 · Feb 25, 2010

I would like to use
http://cgi.ebay.com/Solid-State-Rel...emQQptZLH_DefaultDomain_0?hash=item2a03f6e149

and

http://www.auberins.com/index.php?main_page=product_info&cPath=1&products_id=3

just looking for a second opinion from those that have already built an electric brewery, this is just for boil kettle control and may be adapted later for other uses.

whalenutz · Feb 25, 2010

By looking at the output on the pid and the input control of the ssr. the ssr's voltage input is within range of the the pid output, so yes

Brewmoor · Feb 25, 2010

Yeah. That should work out just fine. The control voltage range for the SSR is 5v-32v. The PID SSR output is 12v. They are perfectly compatible.

You will need 120v or 240v to power the PID and whatever your are using for your element.

bf514921 · Feb 26, 2010

great, ordered the ssrs to get them on the say and will order pid and temp probe today.
I was thinking they would wor just fine together, but then again i was tired, and it never hurts to get a second opinion.

SSR and PID combo, with they work together

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

bf514921

Supporting Member

whalenutz

Senior Member

Brewmoor

Supporting Member

bf514921

Supporting Member

Similar threads

Latest posts

SSR and PID combo, with they work together

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

bf514921

Supporting Member

whalenutz

Senior Member

Brewmoor

Supporting Member

bf514921

Supporting Member

Similar threads

Latest posts

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!