Draft system parts list

Can anyone list out, or point me to, the basic parts to set up a four tap draft system. I got an old coke fountain machine with a built in cooler, and several corneies, so what I am looking for is the parts between the CO2 tank, and the fountain machine. I need to know the number of regulators mostly, I assume you need a regulator for each keg, or can you run splitters, but need to have the tanks at the same pressure. I am brand new to the keg thing, so please make it KISS as possible.

You only need one regulator if you're going to serve all kegs at the same psi. You can use a manifold or line splitters to run gas lines to each keg.

Here's what you need for 4 kegs (it has parts listed). I would suggest using 10 feet of beer line for each keg in order to minimize foaming. http://stores.kegconnection.com/Detail.bok?no=328

Here is a link to a sticky thread about all things kegging https://www.homebrewtalk.com/f35/sticky-kegging-faqs-43347/

Thanks a lot. Apicture is worth a thousand words. Now I have to pick this up,clean the machine, and get to some brewing to fill the kegs.