Recent content by ZWood15

I use the exact same system and it works great! I don't have the kegs here with me as they are at my brewing buddy's house, but all you need is someone who has a 2" triclover clamp to measure it at its widest point. My guess is that a 4" hole would work and give you a little leeway

Here are a couple pics of the rims in a box I'm building with a buddy. Used a gang box for the switches and U bolts to mount the tube. Still have to finish wiring it up, but its coming together nicely!

Test your evap rate and use the measured value. Put a certain amount of water in your kettle and boil for an hour then measure the amount after the boil and calculate what you lost!

Try Here 1st Result: http://www.homebrewkorea.com/

my closest liquor store has it for $8.99, but it was $13.xx when I first saw it...

I use the same method and don't have any bottles that I have been storing, but what I love is the ability to get the carb exactly where I want it, then bottle it as is. With yeast and bottling sugar, I always felt it was a crap shoot as to whether or not it would be right. I still bottled my...

Double and triple check the spacing with kegs in the fridge to make sure a shank doesn't interfere with the placement of the kegs. I would also advise removing the shelves and such on the inside of the fridge and replacing with a sheet of wood or something similar to give more internal space.

I use this and love it: https://www.homebrewtalk.com/f35/we-no-need-no-stinking-beer-gun-24678/ Chances are you have some/most of the parts already around. I just needed the stopper...

P-J > Thank you for making that so plain and easy to understand! I have always had trouble telling them apart, but pointing out the grooves for the gas-in post has just solved that problem. Thanks!!

It might not stay pretty, but I don't see how the cold could affect steel too much. I would worry about rust. Could you find a grill cover or a tarp or something to wrap it up in when not in use? I wouldn't really want it outside bare...

Inbox has been cleaned out, sorry about that!

Hey guys, I have a friend who is starting to work on his graphic design portfolio and put together a label for one of the beers a buddy and I made. He is working on a couple more for us as well as a brewery logo that I will post once its ready. He would be interested in making logos for...

Avery and Mountain Sun are my favorites in the boulder area for breweries. If you can get to Longmont (25 minutes) there is Oskar Blues and Lefthand. For beer bars in Boulder, The West End Tavern has about 40 taps and a pretty decent bottle selection. Backcountry Pizza just opened and has 50...

Thats what it looks like to me. You could also get a 90* SS elbow and use it to replace the coupler on the inside of you kettle, it should sit off of the bottom enough to flow and will pull more liquid than the coupler. If you do go that route, remember to clean thoroughly, as the threads could...

I have to put in a vote for AHS. They ship fast and have a great crush. Also, if you can spend over $100 (pretty easy) you get free shipping...