Recent content by WroxBrew

I'm in

I don't find that it adds anything to clean-up. The whirlpool actually works quite well if you have the patience. It adds time, which as we all know can be in short supply. I have run low on time on a few batches and wirlpooling is where I tend to make it up when things are behind schedule. When...

Thanks. I just got a fridge for my kegs for free, but is the wrong type for the fermenter. I hope to get a setup for the fermenter, but I have other basement issues I have to deal with to make it a good spot for fermenting and my kitchen is too small for a second Fridge.

Hi Stonebrewer. Hopefully I can shed a little insight on these issues for you. 1. Mash Tun temp gauge. I originally had the same issues as you, and this is what I've found. First, the gauges are not calibrated from the factory, so the first thing I did was to fill it with 150 degree water. I...

1. I realized that I had run out of Citra! I thought I had a lb. left, but it turns out I didn't. :( I did manage to locate some and I'm waiting on delivery. On a good note, My original batch that has been aging has gotten significantly better and less one dimensional. Only 3 22's left of it...

Thanks. I am very happy overall with this setup and getting better brewing each batch I make. 1. I have no regrets. The system works as it was Intended. Both Stout tanks and all the great info from everyone on this forum actually made the process of building this relatively painless. I am...

I have read in other posts that it is not a great idea to have a 90 degree bend to close to the outlet of the pumps (cavitation issues). You may find you will need an extension before the 3 way valve to get it farther away from the outlet. YMMV.

Yes , I do understand this. I can get to about a 2 degree difference with the correct flow and I'm measuring the temp at the inlet to my mash tun. The one thing I've been thinking though, is that although the HLT temp is higher, the wort entering is cooler and that not all the heat is...

Thanks, I'm thinking of making it my next IPA, as my Citra (3c's) recipe was a little off. It came out really one dimensional in both malt flavor and bitterness. Not bad, but not great either. I'm going to try to stock up on some more Amarillo as this one seems to disappear quickly. I have a...

I did some preliminary new testing on my 20 gal system just last brew, and rate of flow through my herms can change the temp at the mash inlet over 8 degrees. Too fast, and the temp will be too low, and if too slow, the temp will reach about 2 degrees below my HLT set point but take too long. I...

for orangehero:

Subscribed. Hoping there will be a code for the SS center soon

That's where I'm heading. A 2 or 3 barrel Nano. This will eventually be my test batch system in the brewery. I have an LLC setup and currently looking for a commercial space so I can get started on the licensing. Just to confirm, All the ports have 1.5" tri-clamp fittings. We were discussing...

I just picked up a bunch of Amarrilo. I might have to try that. I've never combined Citra/Amarillo together. Looks like a good recipe. I use nugget also as my bittering hop. Let me know how yours comes out.

It's just a recipe I've been playing around with. I'm using late addition citra/centennial and dry hopping with citra/cascade. Kinda a 3c's ipa actually. I just had some out of the keg this weekend and it has a nice melon with a hint of pineapple thing going on. It's a nice change from the big...