Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Vladimir Kim

Vladimir Kim

New Member
Joined
Last seen
Messages
3
Reaction score
5

Latest activity Postings About

    • Vladimir Kim
      Vladimir Kim reacted to IslandLizard's post in the thread Low OG with Like Like.
      Volume marks in most kettles are often a (very) rough guide and hard to read. I wouldn't bother etching in new ones, just use a...
    • Vladimir Kim
      Vladimir Kim replied to the thread Low OG.
      I measured the boil-off rate three times and got an average of about 0.55 gal/hr. In addition, I made the necessary adjustments to the...
    • Vladimir Kim
      Vladimir Kim reacted to McMullan's post in the thread Low OG with Like Like.
      Have you measured your boil off rate? Your expected might be too high. Seems high to me.
    • Vladimir Kim
      Vladimir Kim reacted to IslandLizard's post in the thread Low OG with Like Like.
      Welcome to our forums! I looks like your boil-off is not sufficient. You're not topping up volume at the end of the boil, are you? The...
    • Vladimir Kim
      Vladimir Kim reacted to hotbeer's post in the thread Low OG with Like Like.
      You need to look at the volume of wort that you had at the end of each boil and compare it to what the recipe software you used said it...
    • Vladimir Kim
      Vladimir Kim replied to the thread Low OG.
      I will have to look into this. I have the software currently showing 0.75 gal/hr from the profile for the system. The kettle came etched...
    • Vladimir Kim
      Vladimir Kim posted the thread Low OG in Beginners Beer Brewing Forum.
      Hello. Relatively new to all-grain brewing. I have a Clawhammer 120V system and I typically brew two gallon batches. My issue is that I...
    Show older items
  • Loading…
  • Loading…
Back
Top