Recent content by vike4life

Hey everyone, I just got done building a rib cage immersion chiller i used 50ft of 3/8 copper tubing. I wanted to thank everyone on the thread, for all the helpful comments. My chiller turned out great.

Do you have the dimensions for this build?

Mike C, Do you have the dimensions for your 3 tier brew stand? I like the design. Thanks,

It turned out really good. I let the fridge warm up to room temperature then the coolant line bent pretty easily. Here are some pics of the final build

Holgar, I had a small spot where i got micro abrasions. I noticed that when it is wet you can't see them. So I intend on putting a light layer on top to fix it. The problem is mixing such a small amount of resin.

Thanks!

Here are a couple more. I had to do 4 pours of the epoxy resin. Due to the depth of the wine corks. I used a seal coat to help reduce the amount of bubbles. With each pour I got more used to working with the epoxy the last two pours went well.

Hey guys, I mostly finished my bar. I converted a Sanyo Mini-Fridge into a kegerator. And then poured the two part epoxy on top of rougly 680 wine corks. I have a few more minor things to do, but I think it turned out pretty good.

Hang Glider, Yeah I will post pictures. This project also involves converting a mini fridge to kegerator with a single tap tower. The tap tower will be mounted to the wine cork counter top. Thanks for all your help.

Hang Glider, I left out that i was going to be using wood glue to glue down the corks. Do you think wood glue will work? or should I go with something else?

Drake, I am also in the process of making an epoxy counter-top for the bar I am installing in my basement. I will be making a wood mold, then placing wine corks in the mold then pouring the epoxy over the top of it. Let me know how yours goes.

This is a picture of the lines I am referring to.

I am converting an older fake wood paneled Sanyo mini fridge. I am preparing to bend the freezer compartment down to make room for the keg. There are two coolant lines running to the freezer. One is flexible the other appears to be aluminum and rigid. I am worried the aluminum line will snap...

I am converting a fridge that has a freezer tray like the one you have. Was the coolant connector lines running into the freezer compartment rigid? One of mine is flexible the other is rigid and made from aluminum. I am worried the aluminum will break when i bend it? Did you take any other...