If you really want it clean why not runoff into your BK then boil for 15 min then pitch precultured lacto. either way I wouldnt worry about getting such a clean sourmash just sanitize as normal and try to keep the temperature up for the duration of the mash since the lacto likes it hot. I do my...
Mission Brewery in San Diego sells some bag in a box "growlers". The boxes are usefull since they can be used for tailgating in the parking lot adjacent to the brewery. I am not sure if they can be refilled though but its a cool idea none the less.
Wow this is great. I agree.
Before this I was also tempted to say to say the keggle isn't that bad, but that dress DOES makes you look fat.
Keggle shinyness shouldn't be a brewers insecurity.
I haven't ever used gator pads but wetsand sheets are pretty cheap and you can get a cheap polish for around 3 dollars. That should do the job just as well, its only kegs its not car paint.
without the two pumps you either have to batch sparge, or you can run off your first runnings into a lower smaller pot or bucket using gravity. Both are easy enough but not as cool as two pumps.
It took me a little while but I centered it. I actually used spray adhesive on the magnet, let it dry, then centered it and adjusted it. The spray adhesive actually works really well and will let you move it ever so slightly or even peel it off and re-stick. It has held up well and the magnet...
I also bought one of these off amazon in the 120mm for another stir plate.
https://www.homebrewtalk.com/f11/building-stir-plate-check-out-usb-adjustable-computer-fan-253254/
It is a little more expensive but it has an awesome looking knob which I plan on mounting on the edge of my plexi. I...