Your lines are way to short you have some killer pressure going from the keg to your tap.
I posted this several months ago and I redid my line to 8 to 10ft of hose, that will create resistence, causing less foam.
Also set your co2 level to 12psi when dispensing, not sure of you...
hi i have an issue. I hve C keg liquid post that wont seperate from the C keg. Any thoughts how loosen the post.
:mug::confused::drunk:
i am at the point i need to replace the post as it seems chewed up.
Juan THANK YOU. i took off the liquid post and rod and it was 99% clogged. took and air compressor to blow the line out and poof i now have horse power and liquid shoot out like a oil gusher.
all is good now.:):):)
I took the keg out of the keezer to defrost and to eliminate the frozen beer issue.
BTW I have used this keg in the past with no issues. Thanks I didnt check for the clogged tube, ( one thing i didnt do), I will check tonight.
Hi i just finished up my hoiday ale and i have an issue with no presure coming out of the tap, currently is a drip pace.
Steps took
keez set for 40d degrees
check seals - have pressure C keg
checked co2- have pressure.
shorten line to ft and i do not see the beer going through the...
hello can any one please give me a suggestion of what length the liquid hose should be per keg?
currently i have 2 kegs in place but my hose is 5ft foam city. i just order hose to correct this issue. i am guessing at least 10ft per tap.
i am trying for shoot for a 4 tap system and i not...
Help!!::(:(:(
just kegged my 1st and 2nd kegs and i have let the keg sit at 30psi for over 24hrs, i bled the line from extra gas turned the psi down to 3psi and i get 90% foam.
i cleaned my lines and tap dispenser but no luck.
Any suggestions???
Hi probe has been tested,working accurately.
Probe is on the top of the keezer.
No fan is in keezer.
I may move the probe lower in the keezer.
Thanks.
Pete m