Recent content by louballs

Sorry this is a double post, didn't think this one got posted.

Ahhh ok, im not actually making my own beer...yet. Im using commercial beers so they are already carbed pretty well.

My pressure varies depending on the beer i have on there. I suppose I will have to increase it with a longer line. What advantage does the longer beer line give you?

Last question, what diameter beer hose did you use? Micromatic states the standard 3/16" is not good for over 5 feet. Did you use 1/4"? Thanks!

Interesting, I didnt think of using one with the curve, but with the small tower thats probably a good idea. I will swap out the beer line next too between kegs and my next cleaning. Thanks for the help! Lou

Thanks Rian! Did the tap/shank fit ok with the stock Vissani tower? I've heard some people had issues. Looking at the faucets/shanks ok micromatic, im not sure what size shank to get that will fit properly...

I have one of the Vissani (Magic Chef) kegerators that I picked up for very cheap. After getting the temperature issue squared away installing a few cooling fans, it is working great! My new issue is that I can't install any custom tap handles due to the faucet not being a standard size (why...

I have one of the Vissani (Magic Chef) kegerators that I picked up for very cheap. After getting the temperature issue squared away installing a few cooling fans, it is working great! My new issue is that I can't install any custom tap handles due to the faucet not being a standard size (why...

Thanks everyone. I couldn't find this anywhere! Went to home depot last night and they had nothing that matched the ruined one I brought with me. Even the salesmen said they didn't have it. Then on the floor, loose, was one just sitting right there. So I picked it up, disinfected it, and we're...

Yes, thats the one zach. Thanks!

Does anyone know the size/name of the rubber washer that is between the hose from the CO2 tank (5 lb) that connects to the keg coupler? I noticed all my co2 was mysteriously gone. I checked all the hoses and noticed that the rubber washer in there was pretty much destroyed. I want to order a...

Ok cool, definitely nothing went into the regulator I double checked. It was only a marginal amount of beer.

Well this is my first time using a kegerator etc. I was tinkering with the thermostat in the fridge to get the temp right. I tipped the keg over to get it out of the way for a second (stupid) next thing I know there was a little bit of beer in my co2 line. As soon as I uprighted it the beer went...

Good to know! Did you have to tinker with the thermostat at all. The fridge itself isn't getting below 40 without a keg. I've read online that some people have taken off the thermostat housing and had to adjust the screw in there a bit. I'm going to give that a try.

That's what my brother suggested, I might give that a go!