Recent content by iandh

Its an interesting point about homebrew fests. I'm not sure what plans the NorCal Homebrew Fest have. I would assume the past interpretation of the rules would not change. I've been talking with the Trade Enforcement Unit of the Cal ABC and I found their interpretation of donating beer for...

Slight correction, it was signed and will be in effect on Jan 1st 2014.

One of the guys in Sirwisa Brewing Collective pointed me to AB-1425, which was signed Oct 1st. Its now legal to donate/pour homebrew at nonprofit fundraisers in California! :mug: The now signed bill states... 23356.2. (a) No license or permit shall be required for the manufacture of...

I took these photos in May. I keep these at my parents place outside of Napa, CA. Shows you what happens if you don't prune them enough!

Hi Folks, Some other homebrewers and I are filling a 60 gallon pinot barrel with a flanders red. Primary fermentation was done with cali yeast in carboys and we're all going to contribute beer to the barrel. We were shooting to mix everyone's beer in the barrel at a gravity of 1.025 to give...

I'd also love to hear where you source these nails.

Samuel and Sons in Hayward had the best pricing I could find for 1.5" square tubing. I would give them a call. http://www.samuel.com/en/Locations/Pages/USA.aspx

I'm the guy that was filmed in the introduction and build most of the equipment. I tried to stay out of the way on the brew day and let my brew buddies be the focus. As a result I wasn't jumping in and fixing issues as stuff occurred. Both are competent brewers, but I imagine the stress of two...

Its a great place to be! Let us know if you are ever back in town. We're like most homebrewers who dream of opening a brewery. I'm not sure if it will ever happen. We're just enjoy brewing on sundays, and talking with curious people walking by.

Definitely some good feedback, which I'll relay to the filmmakers. Yeah, I'm not sure if future episodes will include more info about the brewing process. From my understanding they are trying to focus more on the culture of homebrewing in the area.

(Full disclosure: We were filmed for the first episode) brew-age.com We were lucky enough to be included in the first episode of Brew-Age, a web tv series about beer/homebrew culture in SF Bay Area. From what I hear, this is first of several episodes lined up and will be released soon...

You are correct, the hopper goes on over the mill and the thumbscrews must be removed during initial setup. If a remember correctly, there are also some bolts along the top which need to be screwed on after the hopper is attached.

I have the same mill. I'm not sure I follow what you are doing, but here is how I would adjust the gap. A) Loosen the thumb screws (labeled 1 in the picture). B) Set the gap with the end nobs (labeled 2 in the picture). These rotate 360 degrees so they don't "tighten". C) Tighten the thumb...

I had the same problem with my MM2 2.0. Finger tightening would not keep the gap consistent. It would grown substantially with the first 10lb of grain through the mill. I ended up using pliers too, but after 6 months managed to shear the heads off. I resolved the issue by contacting Monster...

Theres a commercial hop farm in Lake County (next county over from Napa) call Hops Meister. The owner Marty is really nice guy. http://www.hopsmeister.com/ He provides all the "local" wet hops to northern california breweries. Russian River used Marty's wet hops for the Toronado's 25th...