Tried a different set of channel locks last night and got both of them loose on about the 30th try :) I learned my lesson - hand tight means hand tight. Thanks all.
Well, the handles are off ... kinda. I'll post a picture after I get home to explain. Basically, for both handles, they are 2 part handles -- and the top (main) part screws off, but the bottom part is still attached to the jacket. So that's actually a second problem I have! I guess I didn't get...
Quite embarrassed to even ask this, but ....
2 of my 3 perlick faucets have the handle jacket stuck on: essentially it is piece 1 here that I am unable to unscrew...
Perlick 525SS faucets. I have 2.
$35/ea
$60 if you buy both
I have a bunch of spare o-rings I will give you as well with these. A couple of very, very minor knicks on piece #7 in this picture:
https://www.perlick.com/store/webcatpic/215
They are very minor knicks, still looks perfect...
I have a 3-tap keezer, using commercial kegs. Suddenly the first faucet doesn't pour.
I am using this distributor:
http://www.kegconnection.com/air-distributor-3-way-with-check-valves/
The left-most one is the line to the keg which doesn't pour. I've tried re-tapping the keg, and I've...
I bought 2 big computer fans, wired them to old cell phone chargers so I can just plug them in the power strip behind the keezer. I screwed the fans to small pieces of 2x4 so I can move them around as I wish. One is currently at the bottom in the corner, and I jammed the other 2x4 between 2...
I used 3 welding magnets I got at Harbor Freight for $2.50/ea. I painted them black. Additionally, I put black electrical tape on the part that would be against the freezer, preventing them from scratching my paint.
The drip tray sits on these 3 magnets. I then put 3 rare earth magnets on the...
I bought these from Keg Connection in their 3-keg commercial kit. I upgraded to Perlicks. 1 of these has literally never been used, the other 2 have had ~maybe~ 20 beers each poured through them. I won't lie or mislead, I upgraded to Perlicks because these were a bit sticky if you didn't pour...