Search results

Tried a different set of channel locks last night and got both of them loose on about the 30th try :) I learned my lesson - hand tight means hand tight. Thanks all.

Well, the handles are off ... kinda. I'll post a picture after I get home to explain. Basically, for both handles, they are 2 part handles -- and the top (main) part screws off, but the bottom part is still attached to the jacket. So that's actually a second problem I have! I guess I didn't get...

Quite embarrassed to even ask this, but .... 2 of my 3 perlick faucets have the handle jacket stuck on: essentially it is piece 1 here that I am unable to unscrew...

Sold to blowntri

Sorry, just saw these messages! Sent PM to Blowntri5, if he'she doesn't want them I can sell to babski ... will keep you posted

Perlick 525SS faucets. I have 2. $35/ea $60 if you buy both I have a bunch of spare o-rings I will give you as well with these. A couple of very, very minor knicks on piece #7 in this picture: https://www.perlick.com/store/webcatpic/215 They are very minor knicks, still looks perfect...

I have a 3-tap keezer, using commercial kegs. Suddenly the first faucet doesn't pour. I am using this distributor: http://www.kegconnection.com/air-distributor-3-way-with-check-valves/ The left-most one is the line to the keg which doesn't pour. I've tried re-tapping the keg, and I've...

This is the coolest keezer I've seen on this site, excellent work, it is gorgeous!

Sold.

For those of you who painted your keezer black, do any of you have problems with strong magnets scratching the paint?

So the fan is a DC fan also, right? Not an AC fan?

I bought 2 big computer fans, wired them to old cell phone chargers so I can just plug them in the power strip behind the keezer. I screwed the fans to small pieces of 2x4 so I can move them around as I wish. One is currently at the bottom in the corner, and I jammed the other 2x4 between 2...

you forgot the best part about the super bowl .... 43-8!!! GO SEAHAWKS!!!

I used 3 welding magnets I got at Harbor Freight for $2.50/ea. I painted them black. Additionally, I put black electrical tape on the part that would be against the freezer, preventing them from scratching my paint. The drip tray sits on these 3 magnets. I then put 3 rare earth magnets on the...

I bought these from Keg Connection in their 3-keg commercial kit. I upgraded to Perlicks. 1 of these has literally never been used, the other 2 have had ~maybe~ 20 beers each poured through them. I won't lie or mislead, I upgraded to Perlicks because these were a bit sticky if you didn't pour...

I did the direct wiring as well (I believe I got the idea from Trevster's build post). here is my little diagram I drew up (for a GE 7.0 cu model). Just mounted it by cutting a hole in a little piece of scrap metal with a dremel. Never understood why I'd want to keep the old controller in place.

Mine had a smooth finish, but like they said, just used 200 grit sandpaper and painted away. The first coat will come off looking like camouflage, fear not. Coat 2 will make it look better. I did 3 coats of black rustoleum appliance paint and the thing looks terrific... just sanded before...

So I painted the freezer 6 days ago -- in the warm -- then brought it inside to dry. It was obvious I needed another coat as there were some spots that just needed it. The can said I have to wait a week, so I am almost ready to do so. Going to take the same approach, it's supposed to be in...

Got it painted! All is well. Kept it inside for a night then moved it outside when it was 60 degrees -- put on a few coats, and brought it back inside to dry (it got down to the 20's overnight). Seems fine -- but I will need another coat as there are some spots on the corners and other random...

Thanks for all the tips, I've held off on this for now. However, it looks like a high temperature of 57 tomorrow. I brought the freezer inside the house and have it disassembled (lid removed, hinges removed, etc.) and have it all the important stuff taped off for painting. I figure it will be...