Recent content by charleskmoore2

http://www.micromatic.com/article.aspx?artid=11 great article on keg sizes.

I had an extra regulator that I had parted out so I thought I would be frugal and use the CGA320 adapter that was on it. I received the paintball adapter and 1/4 to 1/8 adapter in the mail. I was happy to get started taking the CGA320 adapter off my old regulator and put this apparatus...

Homebrewstuff.com has the tri-clad 1.2mm SS 15 gal with valve and thermomter discoutned to 189.99 due to some cosmetic issues on the welds, guaranteed not to leak. Picture appears to be the same ones I bought from morebeer for a lot more. I ordered one to give it a go, I weld so I've not got...

Blue State, good on ya for putting some science and video to an age old question. Looks like 6 of one and half dozen of the other.

I know tap water will turn star san cloudy over time which is why I use distilled in my spray bottles. As for the chalky residue, just as with the foam, I don't beleive it to be a problem. If in doubt, I suppose you could rinse if off with fresh water and do again but I think you should be ok.

Answering my own post with an email from Blichmann. Perfect! Charles, Thank you for the email and for your service. If you would like you can order and we will ship direct, even to APOs. If you still wish to ship via your friend the conical will ship with 30x20x20 dimensions and 45 pounds...

I am thinking of ordering a Blichmann 14.5 conical but it would need to be shipped to an FPO(military) address. Does anyone know the size of the packaging? Based on the dimension given on their website, it's possible that it could ship via USPS. However, depending on how much packaging is...

A bit of an old link but wanted to post what info I have. I purchased the Millar's grain mill, B3 series around October 2013. I had emaield them to ask if they would ship to a APO/FPO/DPO address and they replied right away. It came to my military overseas location in no time and was packed...

I recently placed an order with them and they went out of their way to ensure my order was taken care of. It arrive to my overseas military location in 6 days which is practically unheard of. I really appreciated them going the extra mile to make my order happen.

1) Below is a pic of the inside. You can see the power supply on the left hand side which is used to power the LED. I disasembled an extra phone charger I had lying and broke it down to just the board. I soldered directly to the board on the 120V side and spliced on the 12V side Fuse and...

That hella cool! I originally wanted just a simple drill pump then I started looking at 12v pumps but the bug bit me and I kept looking more and more into it. Now that I think of it, I think my hobby is actually researching things to buy than actually doing anything...

This is a beer transerfer pump and controller I put together. It uses a 110V Shurflo 2088-594-154 industrial diaphram pump. Shurflo says the pump is rated to 170F. It may be a bit overbuilt but hobbies are supposed to be fun, right? Three switches are: Power, constant on and momentary. It...

I too am impressed with morebeer. I'd love to have a local brew shop to visit but in my overseas location, I don't have that luxury. I have ordered from morebeer and they have always been able to ship to me in a quick manner. I had one issue with a leaking weld on a stainless kettle and they...