Recent content by cbjr1960

Yakima 728
Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. C

    The "U-Brew Mark One"

    Thanks, The brewery is going in the room next to my bar so I will have a place to wash glasses.
  2. C

    The "U-Brew Mark One"

    and there you have it!
  3. C

    The "U-Brew Mark One"

    The fittings for the sink are from tractor supply. I am ordering a livewell screen from cabella's for the lower one to keep ice from clogging it.
  4. C

    The "U-Brew Mark One"

    more pics 3
  5. C

    The "U-Brew Mark One"

    not as hard as it looks, I installed the relay board in a separate box with all the 110 to limit the wiring going up to the box. I also installed an acrylic cover so that I could see the relay lights without removing it. And used a watertight connector to run 110 from the 220 box, this way I...
  6. C

    The "U-Brew Mark One"

    The red LED's between the PID displays are wired directly to the SSRs so that they come on every time the burner gets energized so that I know how often they are cycling. I also installed a green LED right above the key and wired it to the heartbeat so I know every thing is OK (and the flashing...
  7. C

    The "U-Brew Mark One"

    No you are not! only three the other is a wayne utility pump for the chiller, I wouldn't use a march for chiller water
  8. C

    The "U-Brew Mark One"

    I haven't brewed on it yet as I have to run a 220 line from the box in my cave to the brew kitchen in the next room, The sink does double duty as I have the cooling lines plumbed right into the side walls of the sink and the plan is to fill the sink with ice and water to run the plate chiller...
  9. C

    The "U-Brew Mark One"

    Here it is finally finished, build pics will follow shortly tho I must admit I was a little lazy documenting the build. It is powered by a Brewtroller 4 Pro board, and I used Blackheart's control panel as a model.
  10. C

    New Electric HERMS build

    I got my brewtroller today and went down to the electric supply store to get case Stuff. here's what I came up with. I started with an 8" x 8" x 4" pvc water tight panel box and things went from there. I decided to go ahead and mount the panel so I can plan my wire routes. I am going to use a...
  11. C

    New Electric HERMS build

    scored this @ the scrapyard the other day, $275 scrap weight price! Second pick is the proposed setup; HLT underneath right side on a shelf with it's own dedicated march 809, Mash tun right above it with lines going down to SS Heat exchanger in HLT, over to BK on left, wort cooling via two...
  12. C

    New Electric HERMS build

    now that the cave is done I am starting my Electric HERMS build. So far I have 15 Gal Bayou Classic for the HLT, 15 Gal Blichmann Boilermaker Mash Tun W/ Blichmann AutoSparge & Blichmann false bottom, 15 Gal Blichmann Boilermaker brew kettle Greenlee Punch set, $160 but I plan on...
  13. C

    HLT question

    OK, you guys have convinced me, I went out and bought a Bayou Classic 15 gal @ $160 for my HLT. Will be documenting the HERMS build in the DIY section.
  14. C

    HLT question

    The 40 & the 20 gallon are the same size as a keg. Just one is taller than the other.
  15. C

    My Cave

    thru the doors is the brew kitchen and you have to go thru the kitchen to behind the bar, and yes I did it on purpose to keep people from behind the bar. 2 or 3 drinks and everyone wants to be a bartender! It keeps floor mopping to a minimum. And yes I can reach the taps from the front as I do...
See more
Back
Top