Recent content by bozotros

Complete all grain home brew setup! Well over $3,000 invested; we made many, many tasty brews with this setup. $1,000 obo; not interested in selling in pieces; you buy it and take it all! Includes: Ball lock kegs: 5 gallon (8 kegs); 3.5 gallon (3); 2.5 gallons (4); 1 gallon (2) 3 brew pots...

French door refrigerator my wife "hated", now a 6 tap kegerator. Still looking for the right set of 2 drip trays...

Sweet setup. Thanks for the suggestion. I like the look of the integrated drip tray. I had thought I didn't want mine that way, so the taps are not spaced to fit a tray like that.

What's left are drip trays, and some method/system to control all the hoses/tubing inside. My one big planning error was to fail to note the level of the top of 5 gal ball lock kegs as they would sit in the fridge, and then set the level of the tap hole high enough to have good clearance for the...

The 2 top shelves just still fit & pint glasses fit on the shelf. The drawer freezer below is full of chilled pint glasses so I'll likely use these shelves for something else.

The 2 way manifold needed to be in the center of the fridge box, so I took the center shelf bracket out, cut as far up as possible to still allow a shelf to fit. Added 2 plastic moly screw holes & heavy duty Velcro & now the manifold is where it needs to be.

The regulator assembly went into the left door much more easily after all the testing & false starts on the right door.

Taps done!!

The 3 tap holes on the left door. The far left was the last drilled & the pilot bit in the center of the hole saw bit snapped in 2 half way through the drill. RIP

From the inside.

3 holes, 3 shanks, 3 taps. Sweet!!

The end of the shank that connects to the tap fit neatly in the hole

First hole

Cutting the first hole in the door took me a while to get up the courage. After consultation at the hardware store we used this 1" bimetal hole saw.

I'll post the dimensions this weekend. Also pics of the latest work.