Bobby_M

I own and operate a homebrew shop. Do not tip me.

Did you have a separate conversation with the OP outside of this thread? If not, how did you ascertain that he cannot loop the gas port...

It's kind of a moving target. If someone quotes anything from Kunze or Narciss, the retort is that it's less applicable on a homebrewing...

No one that I'm aware of is looking at clarity in the mash for the mash's sake. The implications of a vorlauf (recirculating) is...

I don't think anyone has done any conclusive or convincing testing on this front. Brulosophy did several comparisons of...

If you hung around for one of my brew days, the last thing you'd say about my eBIAB is that it was frail or complicated. It's a set and...

The table groupings are determined by the competition coordinator and the best competitions lay that process out to some degree in the...

The time it takes to gravity drain depends on the inside diameter of the hose and the height you put the FV above the keg.

It depends on the volume and gravity of the wort you're pitching in and I'd also usually say the age of the pack, but knowing how new...

If you're going to pull the bag and squeeze then WORT CLARITY is just not one of the applicable benefits of constant recirculation. It...

I mean, that's a pretty good option if you're asking. It's the exact one that I'm brewing on lately but I like this picture of my friend...

If the LED on the SSR itself is not lit but the element is still heating, I would suspect either the SSR has failed or you have a...

There are a lot of theories out there and I think one of the most corrupt of them all is that spunding creates finer bubbles than force...

Cordless drills are generally speed adjusted with a 2 or 3 speed gear box which provides the benefit of increased torque output at...

Write out all the steps you took throughout the entire brew session.. How much water did you put in the mash tun initially? What temp...