You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
-
-
Yes.
I wouldn't say the pump switch is superfluous. You can use it to shut off the pump during the mash, without having to mess with...
-
Relative to @mattd2 's comments: Do you have (you should for your protection) a GFCI breaker protecting the power feed to your control...
-
This makes the most sense, except for the voltage measurements and that this is the second SSR to behave like this.
@Adrian Gresores...
-
If the LED on the SSR itself is not lit but the element is still heating, I would suspect either the SSR has failed or you have a...
-
That actually sounds so good!
-
Is the element getting hot when it is connected.
You should expect to see a voltage difference over the SSR 1 & 2 terminals when itnis...
-
fwiw, while it may sport an rj45 receptacle, that valve and flow meter assembly almost certainly does not connect via ethernet...
-
Loading…
-
Loading…