Electric Brewing Supply 30A BCS Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > BG-14 HELP please
Reply
 
LinkBack Thread Tools
Old 03-19-2011, 08:56 PM   #1
justcopen
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
justcopen's Avatar
Recipes 
 
Join Date: Apr 2010
Location: Tehachapi, ca
Posts: 100
Liked 4 Times on 4 Posts
Likes Given: 1

Default BG-14 HELP please

I have been reading and reading and now I am so lost in the forums. I have a bg-14 bayou classic burner and want to install it in a brew stand that is being controlled by a honeywell vr8200a lp gas controller. will this work? Do I need to drill out the orifice to convert it to low pressure lp? Any help would be appreciated. I just want to brew and drink good beer not blow me and the girl friend up!!!

__________________
justcopen is offline
 
Reply With Quote Quick reply to this message
Old 03-20-2011, 03:00 AM   #2
kladue
Senior Member
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2006
Location: Turner, Oregon, Oregon most of the time now
Posts: 2,309
Liked 47 Times on 43 Posts

Default

You can drill the gas fitting orifice out to 3/32" or buy the LP gas valve from Williams brewing if you are not comfortable drilling the gas fitting. You will need a low pressure LP regulator, a Marshall 290 series regulator works well, this regulator is common in the RV trade so obtaining one is not hard.
If you buy the Honeywell VR8200 valve just make sure the LP conversion parts are included, otherwise it is about $5 for the stiffer spring used for the natural gas to LP conversion. The same advice is needed for the Q314 pilot, you need the .010 LP orifice as they are usually sold with the .018 natural gas orifice.
If you need additional part number help PM me and I can forward the links to suppliers for needed parts.

__________________
kladue is offline
 
Reply With Quote Quick reply to this message
Old 03-20-2011, 10:25 PM   #3
justcopen
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
justcopen's Avatar
Recipes 
 
Join Date: Apr 2010
Location: Tehachapi, ca
Posts: 100
Liked 4 Times on 4 Posts
Likes Given: 1

Default

Thank you Kladue for the info. I all ready have a low pressure brew stand with jet burners that sucks. I think I will order the valve from Williams because it would be nice to controll the flame some.

__________________
justcopen is offline
 
Reply With Quote Quick reply to this message
Old 03-20-2011, 11:25 PM   #4
kladue
Senior Member
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2006
Location: Turner, Oregon, Oregon most of the time now
Posts: 2,309
Liked 47 Times on 43 Posts

Default

You can set the maximum flame size by tweaking the built in regulator feature of the Honeywell valve, open burner valve wide open and back off regulator screw on control valve body to max flame level you want. That is the method used in the field when the control valve is installed in a retrofit or first time firing of a new furnace or boiler.

__________________
kladue is offline
PuckeredPenguin Likes This 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools