andysim
Well-Known Member
That's a stout in Canada:cross:
XXXXX's Whirlpool WAR349BSL Kegerator Conversion (37 picture step-by-step slideshow)
- Thread starter XXXXX
- Start date
Help Support Homebrew Talk:
That's a stout in Canada:cross:
cyclogenesis
Well-Known Member
*subscribed*
One thing I notice here in the states is that you can get these small fridges for not to many $$ !
One thing I notice here in the states is that you can get these small fridges for not to many $$ !
Sorry to revive this old thread, I just picked up a whirlpool WAR488 (4.4). Did my measurements and can fit my 5# tank, dual product regulator, my 5gal ball lock and a 3 gal ball lock. I'm not using a tower.. Using 2 pass through perlick taps on the side. They will be close to the top of the side panel, and as close to the front door as possible.
Do you think I will have any coolant lines there? I didn't think so as the element is on the back wall. But don't know.
Also, the first tap will drill in where the wall is still thin. However it flares out a little afterwards where the 2nd tap will drill through. Is a thicker section of side wall indicative of lines?
Cheers
Do you think I will have any coolant lines there? I didn't think so as the element is on the back wall. But don't know.
Also, the first tap will drill in where the wall is still thin. However it flares out a little afterwards where the 2nd tap will drill through. Is a thicker section of side wall indicative of lines?
Cheers
Similar threads
