Brand New $340 obo
Duda Diesel Wort Chiller 60 Plate Heat Exchanger Stainless Steel Copper Brazed B3-52A
This unit has 1" male NPT fittings.
Other identical items are listed on ebay for over $529 plus over $28 shipping!!!
I will offer *****FREE SHIPPING***** in the continental U.S. using FedEx Ground or a similar method.
I purchased this unit directly from the distributor a couple months ago for use in a small commercial brewery. In the mean while, bought a unit that had sanitary fittings. This unit never left the original shipping box and is brand new, never used. However, the vendor would not refund or even partially refund my money(!!!), so it is up for sale. My loss is your gain!!
This purchase will include (2) street elbows (1" male x 1" female) if needed for plumbing adapters. These alone are a $23 value. Again, both items are brand new, never used. I could also offer tri clover adapters if anyone needs sanitary fittings.
Specs from the vendor:
Stainless Steel 304
Copper Brazed B3-52A 60 Plate Heat Exchanger B3-52A
Heat Exchanger Characteristics:
Dimensions L: 20.7" W: 4.4"
Heat Transfer Area/Plate 0.052 m²/plate (.560 ft²/plate)
Thickness of plates 0.4 mm (.015")
Max Flowrate 200 L/min (53 gpm)
Channel Capacities 0.094 L/channel (0.025 gal/channel)
Design pressure 3.0 Mpa (435 psi)
Test Pressure 4.5 Mpa (650 psi)
Design Temperature -195°C to +220°C (-319°F to 430°F)
Refrigeration Capacity 10-70KW (34,000-238,000 BTU/hour)
Flow direction F1-F3 and F2-F4 (see diag above)
Welding Material 99.9% Copper Corrosion Resistance SS304 has good general corrosion resistance to a range of organic and in-organic fluids. It will have poor resistance to sulfuric and hydrochloric acids. Crevice corrosion may also occur when chlorides (salts) are present in the fluid. Since chlorides are in all natural sources of water it is best to use distilled water whenever possible. Typically, a unit will last about 10 years with regular tap water depending on salt content. Not recommended for use with salt water.
Duda Diesel Wort Chiller 60 Plate Heat Exchanger Stainless Steel Copper Brazed B3-52A
This unit has 1" male NPT fittings.
Other identical items are listed on ebay for over $529 plus over $28 shipping!!!
I will offer *****FREE SHIPPING***** in the continental U.S. using FedEx Ground or a similar method.
I purchased this unit directly from the distributor a couple months ago for use in a small commercial brewery. In the mean while, bought a unit that had sanitary fittings. This unit never left the original shipping box and is brand new, never used. However, the vendor would not refund or even partially refund my money(!!!), so it is up for sale. My loss is your gain!!
This purchase will include (2) street elbows (1" male x 1" female) if needed for plumbing adapters. These alone are a $23 value. Again, both items are brand new, never used. I could also offer tri clover adapters if anyone needs sanitary fittings.
Specs from the vendor:
Stainless Steel 304
Copper Brazed B3-52A 60 Plate Heat Exchanger B3-52A
Heat Exchanger Characteristics:
Dimensions L: 20.7" W: 4.4"
Heat Transfer Area/Plate 0.052 m²/plate (.560 ft²/plate)
Thickness of plates 0.4 mm (.015")
Max Flowrate 200 L/min (53 gpm)
Channel Capacities 0.094 L/channel (0.025 gal/channel)
Design pressure 3.0 Mpa (435 psi)
Test Pressure 4.5 Mpa (650 psi)
Design Temperature -195°C to +220°C (-319°F to 430°F)
Refrigeration Capacity 10-70KW (34,000-238,000 BTU/hour)
Flow direction F1-F3 and F2-F4 (see diag above)
Welding Material 99.9% Copper Corrosion Resistance SS304 has good general corrosion resistance to a range of organic and in-organic fluids. It will have poor resistance to sulfuric and hydrochloric acids. Crevice corrosion may also occur when chlorides (salts) are present in the fluid. Since chlorides are in all natural sources of water it is best to use distilled water whenever possible. Typically, a unit will last about 10 years with regular tap water depending on salt content. Not recommended for use with salt water.