Williams Brewing Grain Mill

[JoeSpartaNJ]

Anyone have any experience with this grain mill:

http://www.williamsbrewing.com/GRAIN-MILL-WITH-7-LB-HOPPER-P3548C250.aspx

I am sure it is one of those "you get what you pay for" type of things but I would like to see if anyone has any actual feed back on this grain mill.

Thanks

 

[philjohnwilliams]

I have been using this mill http://www.ontariobeerkegs.com/OBKrusher_Grain_Mill_with_7_lb_hopper_p/grain-mill-obkrusher.htm which I believe is the same mill since last year. I have to say that I have had virtually no problems with it, and the rollers are easy to adjust. Hand cranking is a pain in the a**, so motorizing it is a must, though I believe that could apply to any mill. A drill running at slow speed does the job nicely for me. The only problem I have had with it is that if you don't really tighten the thumb screws that hold the rollers in adjustment, they ( the rollers ) will move in use. once you have your gap set, tighten the screws with some pliers and you're good to go. Once I did this my rollers haven't moved unless I wanted them to.

 

[JoeSpartaNJ]

Cool. Thanks for the input.


Sent from my iPhone using Home Brew

 

[schiersteinbrewing]

Anyone have any experience with this grain mill:

http://www.williamsbrewing.com/GRAIN-MILL-WITH-7-LB-HOPPER-P3548C250.aspx

I am sure it is one of those "you get what you pay for" type of things but I would like to see if anyone has any actual feed back on this grain mill.

Thanks

Looks almost identical to the AIH Cereal Killer. http://www.homebrewing.org/Cereal-Killer-Grain-Mill_p_2310.html

I've ran about 50lbs through my cereal killer using a very fine crush for BIAB, it has worked very well much better tan my corona mill.