wuttheheeck
Well-Known Member
- Joined
- Aug 7, 2013
- Messages
- 62
- Reaction score
- 0
long story shot I am adding a float switch to my pump control for auto sparging. I have already wired up elements through ssr's but im having trouble now.
I am experiencing a voltage drop over the ssr, Volt meter reads 117 volts on the input to SSR and reads 23 on the output of the power side. I was using my neutral bar for the black probe.
Im controlling the switching side with a 5v, and some small current, but the SSR led is illuminated.
Any possible causes or did i just buy a bad one off the chEapbay
I am experiencing a voltage drop over the ssr, Volt meter reads 117 volts on the input to SSR and reads 23 on the output of the power side. I was using my neutral bar for the black probe.
Im controlling the switching side with a 5v, and some small current, but the SSR led is illuminated.
Any possible causes or did i just buy a bad one off the chEapbay