broncosaurs
Well-Known Member
Located in east county San Diego. Pickup only. $800
Link to some picts:
https://drive.google.com/open?id=1igJncLrpiIfyDnduqmkgGw_a9gkHonpN
Three keggle system. 5-10 gallon batches. Set up for electric but started as gas system. System plumbed with cam locks. All fittings on keggles are SILVER soldered. Most every thing needed to start brewing beer. You would need some fermentation tanks and you would be set. Unit needs 30amp GFI circuit.
HLT
--- 5500w ULWD, site gauge, ss valve, cam lock. Heater mounted using 1" silver soldered nut, not silicone. Nice aluminum wire covers. SS Thermowell to protect temp probe.
Mash Tank
--- SS false bottom, lautering capable, glass lid, ss valve, cam locks. RIMS system w/sanitary clamps, makes for easy cleaning.
Boil Tank
--- 5500w ULWD, ss valve, cam lock. Heater mounted using 1" silver soldered nut, not silicone. Nice aluminum heater wire cover. SS Thermowell to protect temp probe.
Control
--- Four Solo PID Controlers($90 each), HLT, RIMs/Mash, Boil Ans an extra for temp monitoring.
--- Two Crydom phase angle SSR($90 each), for RIM and Boil, not china fotec ****.
--- Boil control w/knob and display to adjust power when in manual% / boil control. The boil power is controlled using phase angle NOT on/off, to keep from burning wort.
--- RIMS can be used same time as HLT on a 30A circuit. The RIMS power is controlled using phase angle NOT on/off, to keep from burning wort.
Two Chugger high temp food grade pumps($110 each) for RIMS, lautering, and transfer.
Many food grade silicon hoses with SS cam lock connectors. Easy on/off. Cam locks are the best upgrade I ever did.
Three Big Blue 4"x12" filters for very pure water to brew with. Takes out all Chlorine and Chloramine. Particulate, coconut charcoal, coconut charcoal.
~ 35' 10awg SO cord.
Untested counter-flow chiller. Copper and silicone tube wort path. About 16' of copper cooling!
Two Bayou Classic 10 Inch Cast Iron Banjo Burners, 10PSI high pressure.
PID Controlers:
https://www.automationdirect.com/ad...ers/1-z-32_DIN_Size_(SL4824_Series)/SL4824-RR
Crydom SCRs:
https://www.digikey.com/products/en?mpart=MCPC2425D&v=172
Chugger Pumps:
https://www.morebeer.com/products/c...75PqoSSDFXM-gkfrI6t0OgERcVHzi-DBoCaYcQAvD_BwE
Cam Locks:
https://www.brewhardware.com/category_s/1844.htm
Keg, beer, keggle, brew, ulwd, RIM, pot, keggel, system
Link to some picts:
https://drive.google.com/open?id=1igJncLrpiIfyDnduqmkgGw_a9gkHonpN
Three keggle system. 5-10 gallon batches. Set up for electric but started as gas system. System plumbed with cam locks. All fittings on keggles are SILVER soldered. Most every thing needed to start brewing beer. You would need some fermentation tanks and you would be set. Unit needs 30amp GFI circuit.
HLT
--- 5500w ULWD, site gauge, ss valve, cam lock. Heater mounted using 1" silver soldered nut, not silicone. Nice aluminum wire covers. SS Thermowell to protect temp probe.
Mash Tank
--- SS false bottom, lautering capable, glass lid, ss valve, cam locks. RIMS system w/sanitary clamps, makes for easy cleaning.
Boil Tank
--- 5500w ULWD, ss valve, cam lock. Heater mounted using 1" silver soldered nut, not silicone. Nice aluminum heater wire cover. SS Thermowell to protect temp probe.
Control
--- Four Solo PID Controlers($90 each), HLT, RIMs/Mash, Boil Ans an extra for temp monitoring.
--- Two Crydom phase angle SSR($90 each), for RIM and Boil, not china fotec ****.
--- Boil control w/knob and display to adjust power when in manual% / boil control. The boil power is controlled using phase angle NOT on/off, to keep from burning wort.
--- RIMS can be used same time as HLT on a 30A circuit. The RIMS power is controlled using phase angle NOT on/off, to keep from burning wort.
Two Chugger high temp food grade pumps($110 each) for RIMS, lautering, and transfer.
Many food grade silicon hoses with SS cam lock connectors. Easy on/off. Cam locks are the best upgrade I ever did.
Three Big Blue 4"x12" filters for very pure water to brew with. Takes out all Chlorine and Chloramine. Particulate, coconut charcoal, coconut charcoal.
~ 35' 10awg SO cord.
Untested counter-flow chiller. Copper and silicone tube wort path. About 16' of copper cooling!
Two Bayou Classic 10 Inch Cast Iron Banjo Burners, 10PSI high pressure.
PID Controlers:
https://www.automationdirect.com/ad...ers/1-z-32_DIN_Size_(SL4824_Series)/SL4824-RR
Crydom SCRs:
https://www.digikey.com/products/en?mpart=MCPC2425D&v=172
Chugger Pumps:
https://www.morebeer.com/products/c...75PqoSSDFXM-gkfrI6t0OgERcVHzi-DBoCaYcQAvD_BwE
Cam Locks:
https://www.brewhardware.com/category_s/1844.htm
Keg, beer, keggle, brew, ulwd, RIM, pot, keggel, system
